CES TOOLS
Project:
Slab Punching Shear Verification
Doc Ref:
CES-CALC-PSH-01
Member:
Column-Slab Junction
Date:
Design Code:
Eurocode 2 (EN 1992-1-1 Cl 6.4)
Engineer:
Qualified Structural PE
CES
Punching Shear Designer (Eurocode 2)
Perimeters u0, u1, u_out & Shear Stud/Link Verification
Open full screen
Load Example
Copy Link
Print / PDF
Column Geometry & Framing Position
Width, c1
(mm)
Depth, c2
(mm)
Location
Internal Column (β = 1.15)
Edge Column (β = 1.40)
Corner Column (β = 1.50)
β Factor
Slab Depth & Design Shear Action
Mean Eff. Depth, d
(mm)
Design Shear, VEd
(kN)
Tension Steel Ratio, ρl = √(ρly * ρlz)
Material Properties & National Annex
fck (Cylinder)
(N/mm²)
Link fywk
(N/mm²)
vRd,max Factor (National Annex)
0.40 (EN Recommended)
0.50 (UK National Annex)
Shear Reinforcement Detailing
Link Bar Diameter
Radial Spacing of Perimeters, sr
(mm)
Must not exceed 0.75d
Control Perimeters Plan
Design Checks
Step-by-Step Working
Step
Equation
Substitution
Result
Clause
Related Guides & Worked Examples
Punching Shear to Eurocode 2: Worked Example
Pad Footing Design Example
RC Beam Design to Eurocode 2: Worked Example
Engineering Disclaimer:
Free tool for educational and preliminary verification. Results must be certified by a registered Professional Engineer.